Key Features:
Integral Waterproofing: Becomes a permanent part of the substrate
Positive/Negative Side Application: Effective on both interior and exterior surfaces
Crack-Bridging Ability: Accommodates minor substrate movement (up to 0.8mm)
Excellent Adhesion: Bonds strongly to concrete, masonry, and stone
Vapor Permeable: Allows structures to breathe while blocking liquid water
Corrosion Protection: Shields reinforcement steel from chloride ingress
Sulphate Resistant: Suitable for aggressive environments
Seamless Application: Eliminates weak joints
Technical Parameters:
| Property | Value | Test Standard |
| Consistency | 160 ± 5 mm (flow table) | EN 1015-3 |
| Pot Life (20°C) | ~60 minutes | - |
| Setting Time | Initial: ≥ 45 min | EN 480-2 |
| Final: ≤ 12 hours | ||
| Bond Strength (28d) | > 1.5 MPa | EN 1542 |
| Compressive Strength (28d) | > 30 MPa | EN 12190 |
| Flexural Strength (28d) | > 6 MPa | EN 1015-11 |
| Capillary Absorption | ≤ 0.1 kg/m²·h⁰·⁵ | EN 480-5 |
| Water Penetration (28d) | < 5 mm (under 0.5 MPa/72h) | DIN 1048 |
| Chloride Diffusion | Very Low | ASTM C1202 |
| Crack Bridging | ≥ 0.8 mm | EN 14891 |
| Packaging | 25 kg multi-layer paper bags | - |
| Coverage | ~1.5 kg/m²/mm thickness | - |
Application Scenarios:
Below-Grade Structures:
Basement walls & floors
Underground parking garages
Tunnels and subways
Foundations and footings
Water Containment Structures:
Water tanks (potable & non-potable)
Reservoirs and dams
Swimming pools
Sewage treatment plants
Wet Areas:
Bathrooms, shower areas, wet rooms
Commercial kitchens
Balconies and terraces
Civil Infrastructure:
Bridges and piers
Retaining walls
Culverts
Repair & Rehabilitation:
Sealing leaking cracks and joints
Waterproofing repairs to damaged concrete
Structural strengthening systems (as protective layer)
Advantages:
Easy Application: Brush, trowel, or spray application
Cold Applied: No heating or special equipment required
Non-toxic: Safe for potable water contact after full cure
Durable: Resists weathering, UV degradation, and freeze-thaw cycles
High Build: Achieves required thickness in fewer coats
Compatible: Can be overlaid with tiles, screeds, or coatings
Typical Application Thickness: 2.0 - 3.0 mm per coat (2 coats recommended)
Substrate Preparation: Concrete surfaces must be clean, sound, and free from laitance, oil, or curing compounds. Pre-saturated Surface Dry (PSSD) condition is optimal. Rough surfaces preferred; smooth surfaces may require mechanical profiling.
Environmental Conditions: Apply between +5°C and +35°C. Protect from direct sunlight, wind, and rain during application and initial curing period (48 hours).
TAG:
Water-Stopping Mortar
Water-Stopping Mortar
Share to:
Category:
Related Products
Message
If you have any suggestions, please leave a message or send us an email. We’ll get back to you as soon as possible after receiving your message or email.
Quick Link
Phone : +8613043668669
Email : l672839203@outlook.com
Address : No. 16 Changning Road, Changshou, Zhouzhuang Town, Jiangyin City
SEND AN INQUIRY
If you have any questions, please contact us!