Product Overview:

ProFlow Supreme is a high-performance, polymer-modified, cement-based self-leveling underlayment designed for rapid installation of smooth, perfectly flat surfaces prior to the application of final floor finishes. Its exceptional flow characteristics allow it to self-level effortlessly, filling voids and imperfections while minimizing labor. This fast-setting, high-strength compound is suitable for interior residential, commercial, and light industrial applications over a variety of structurally sound substrates.

Key Features & Benefits:

Superior Self-Leveling: Achieves flawlessly flat, smooth surfaces (FF ≥ 50, FL ≤ 10 per ASTM E1155) with minimal effort.

Rapid Strength Gain: High early strength allows for light foot traffic in 3-4 hours and installation of most floor coverings in 16-24 hours.

Excellent Bond Strength: Adheres tenaciously to properly prepared concrete, cementitious backer boards, gypsum underlayments (approved), plywood (primed), and ceramic tile.

Pumpable & Easy Mixing: Engineered for consistency and ease of pumping or bucket mixing.

Low Shrinkage: Minimizes cracking risk for durable, stable surfaces.

Smooth Finish: Provides an ideal substrate for sensitive floor finishes like vinyl sheet, LVT, VCT, carpet, rubber, and epoxy coatings.

Moisture Tolerant Formulation: Resists typical jobsite moisture during curing.

 

Technical Parameters / Specifications:

Parameter	Value / Performance	Test Standard
Compressive Strength	> 25 MPa (3625 psi) @ 28 days	ASTM C109
Flexural Strength	> 7 MPa (1015 psi) @ 28 days	ASTM C348
Bond Strength	> 2.0 MPa (290 psi)	ASTM C882
Flow Diameter (Initial)	~ 240-260 mm	ASTM C1616
Flow Diameter (20 min)	> 220 mm	ASTM C1616
Setting Time (Walkable)	~ 3-4 hours	-
Setting Time (Tile/Flooring)	16-24 hours	-
Layer Thickness (Per Pour)	2 mm to 50 mm (1/16" to 2")	-
Coverage Rate (5mm layer)	~ 1.8 kg/m²/mm (0.35 lb/ft²/1/8")	-
Water Requirement	Typically ~ 5.0 - 5.5 liters per 25kg bag	-
Packaging	25 kg (55 lb) multi-wall paper bags	-
Shelf Life	12 months in original, unopened bags	-
Compliance	Conforms to ASTM C627 (Resilient), ASTM F710 (Subfloor Prep), ANSI A118.15 (Tile)

 

Primary Application Scenarios:

Subfloor Preparation for Flooring:

Creating smooth, level substrates over concrete slabs (new or old).

Correcting minor surface irregularities, cracks, depressions, and slopes (< 1:40) in existing floors.

Embedding radiant heat tubing or electrical wiring.

Priming substrates for vinyl sheet flooring (VSF), Luxury Vinyl Tile (LVT/P), linoleum, carpet, VCT, rubber flooring, and epoxy coatings.

Floor Height Adjustment: Seamlessly transitioning between different floor levels in adjacent rooms.

Renovation Projects: Leveling damaged, worn, or uneven existing floors (concrete, tile, terrazzo) prior to installing new finishes.

Commercial & Retail Spaces: Preparing large, open floor areas quickly and efficiently for sensitive commercial flooring.

Residential Applications: Leveling floors in basements, kitchens, bathrooms, and living areas for modern flooring installations.

Light Industrial: Creating smooth, durable surfaces in warehouses, offices, and light manufacturing areas where a seamless floor finish is required.

Suitable Substrates (Must be structurally sound, clean, and properly primed):

Portland Cement Concrete (PCC) Slabs

Gypsum Concrete Underlayments (Approved Types)

Cementitious Backer Units (CBU)

Approved Gypsum Underlayments (e.g., Gyp-Crete®)

Ceramic Tile (Sound, well-bonded, cleaned, and profiled/scarified)

Plywood/Oriented Strand Board (OSB) (Requires specific approved primer/sealer)

 

Installation Notes:

Critical: Follow manufacturer's instructions precisely for substrate preparation, priming, mixing ratios (water & powder), mixing time, and environmental conditions (temperature/humidity).

Proper priming of the substrate is essential for bond.

Mix only with clean, potable water using a low-speed, high-torque drill and paddle. Avoid over-mixing or adding excess water.

Pour quickly and continuously. Use a gauge rake and spiked roller to assist flow, release air, and control thickness.

Maintain ambient and substrate temperatures between 50°F (10°C) and 90°F (32°C) during application and curing. Protect from drafts and direct sunlight.

Ready to achieve a perfect floor? Contact us today for technical data sheets, SDS, and local distributor information for ProFlow Supreme!

 

Key elements used and why:

Clear Product Name: "ProFlow Supreme" - Implies professionalism and top performance.

Concise Overview: Defines the product type, core benefits (self-leveling, speed, strength), and target markets upfront.

Key Features & Benefits: Bullet points highlighting the main selling points in customer-centric language (ease, speed, quality, compatibility).

Detailed Technical Parameters Table: Essential for architects, contractors, and specifiers. Includes critical performance metrics (strength, flow, bond), application-specific data (setting times, thickness), packaging, and compliance standards (ASTM/ANSI). Units are provided in metric and imperial where common.

Specific Application Scenarios: Clearly lists where and why the product is used, covering common residential, commercial, and light industrial needs.

Suitable Substrates: Explicitly states compatible surfaces and the critical requirement for priming/prep.

Crucial Installation Notes: Highlights the most important steps and warnings for successful use (mix, prime, pour, environment). Emphasizes following manufacturer instructions.

Call to Action: Encourages the reader to seek more detailed information.

Professional Tone: Uses technical language appropriate for the construction industry while remaining clear.

Standards Compliance: Referencing ASTM/ANSI standards builds credibility and ensures suitability for regulated projects.

 

ProFlow Supreme is a high-performance, polymer-modified, cement-based self-leveling underlayment designed for rapid installation of smooth, perfectly flat surfaces prior to the application of final floor finishes. Its exceptional flow characteristics allow it to self-level effortlessly, filling voids and imperfections while minimizing labor. This fast-setting, high-strength compound is suitable for interior residential, commercial, and light industrial applications over a variety of structurally sound substrates.